LW 1300 E

The LW 1300 E is designed for large industrial applications and is therefore a favorite compressor for breathing air requirements.

Low speed ensured continuous operation, long service intervals and reduced maintenance costs. The compressor unit comes fully wired with star/delta start system and includes 3x 2.3 litre breathing air filter console for wall mounting.

The 4-stage compressor block is mounted on a painted steel frame and allows a working pressure of max. 420 bar (optional). The drive motor is connected to the compressor by a rubber coupling.

Specifications
• Electro motor (Standard: 400V, 3 phase, 50Hz)
• Painted steel frame (RAL 7004)
• Inclusive a remote control box for wall mounting
• Main-, Start/Stop- and condensate test buttons, as well as emergency stop switch
• Hour counter
• Automatic condensate drain
• Automatic stop at final pressure
• Oil pressure gauge
• Intermediate pressure gauges
• Oil pressure monitoring c/w auto shut down
• High pressure outlet 10 l
• Pressure maintaining and non return valve
• All pistons c/w steel piston rings
• Low pressure oil pump and filter
• Oil- / Water separators in stainless steel
• Safety valves after each stage
• 4 concentric suction/pressure valves
• Filling pressure of your choice (200 or 300 bar)
• Inclusive 3 x 2.3 l filter console for wall mounting
• Connections to your choice
(DIN 200 bar or 300 bar, CGA 200 bar or 300 bar and INT)
• Breathing air purification an accordance to EN 12021

Options
• Auto start system
• Oil temperature display with auto shut down
• Cylinder head temperature monitoring with auto shut down
• 0.8 ltr. Prefilter (Enlarged the lifetime of the filter by approx. 5 hours)
• Puracon filter monitoring (Auto shut down also available)
• ECC control in remote control box
• Power cable and plug
• Block heating device
• 420 bar Version
• Special voltages / frequencies on request

Technical Data