LW 570 ES II
The new generation of breathing air compressor LW 570 ES II is characterized by its sturdy and powerful design.
The new generation of breathing air compressor LW 570 ES II is characterized by its sturdy and powerful design. The improved sound insulation is ideal for being used in commercial and sales areas, as well as in mixed residential and industrial buildings.
A novel drainage system features a 10 litre condensate collection tank, as well as a highly efficient pre-separator unit which improves lifetime of the filter cartridge considerably. Innovative condensate valves also limit the pressure drops during condensation cycles to ensure enhanced profitability. The industry-proven, new lubrication system, as well as reinforced compressor components are the main points of the optimized LW 570 compressor block. This makes it an indispensable unit for professional filling and high-pressure applications.
Specifications
• Electro motor (E-Motor / 400V / 3 Phase / 50 Hz)
• Painted steel housing (RAL 6026)
• Sound insulated housing
• NEW – Heavy duty compressor block components
• Automatic condensate drain
• Automatic stop at final pressure
• Hour counter
• Operating panel with start/stop and condensate test button, as well emergency stop switch
• Motor protection switch
• Safety switch
• Maintenance doors on both sides
• Pressure maintaining and non return valve
• All pistons c/w steel piston rings
• NEW – Improved lubrication system c/w oil filter
• Low pressure oil pump and filter
• Oil- / Water separators in stainless steel
• Safety valves after each stage
• NEW – 0.8 ltr. Prefilter (Enlarged the lifetime of the filter by approx. 5 h)
• NEW – Condensate-Stop-Valve
• NEW – 10 ltr. Condensate tank with venting silencer
• NEW – Maintenance door on both sides
• 4 concentric suction/pressure valves
• High pressure outlet 10l
• Connections to your choice
(DIN 200 bar or 300 bar, CGA 200 bar or 300 bar and INT)
• Breathing air purification an accordance to EN 12021
Options
• Auto start system
• Up to 6 additional hoses available
• NEW – 4- fold filling panel installed at front door
• 200 and 300 bar parallel filling pressures
• Oil pressure gauge
• Intermediate pressure gauges
• Oil pressure monitoring c/w auto shut down
• Cylinder head temperature monitoring with auto shut down
• Oil temperature display with auto shut down
• Puracon filter monitoring (Auto shut down also available)
• ECC control
• Phase monitoring c/w shut down at wrong direction of rotation
• Block heating device
• 420 bar Version
• Air Cooler connection kit
• Power cable and plug
• Special voltages / frequencies on request
Type: | Air cooled piston compressor |
Capacity [l/min] / [Nm³/h] / [cfm]: | 570 / 34.2 / 20.1 |
Max. Pressure [bar]: | 350 / 420 |
RPM [1/min]: | 1100 |
No of cylinders / No of stages: | 4 / 4 |
Prime mover type: | E-Motor / 400V / 3 Phasen / 50 Hz |
Drive power [kW] with 50 Hz / 60 Hz: | 15.0 / 18.0 |
Cooling air req. [m³/h] with 50 Hz / 60 Hz: | 4500 / 5400 |
Lubrication type: | Oil pump + Splash oil |
Oil capacity [l] / Oil pressure [bar]: | 2.9 / 2.0 (+/- 0.1) |
Operating temperature [°C]: | +5°C to +45°C |
Filter capacity [m³ at +20°C]: | 1440 (approx. 42 h) |
Dimensions W x D x H [mm]: | 975 x 1260 x 1800 |
Weight [kg]: | 554 |
Noise level (measured at 1 m) [dB]: | 64 |