LW 100 E1 ECO
The LW 100 ECO compressors are lightweight, reliable and ideal for mobile use.
The main components such as e.g. Motor, compressor block, filter system and filling device are used completely from this series. The steel piston rings in the compressor stages provide long term consistent delivery performance (fill time).
Specifications
• Electro motor (E-Motor / 230V / 1 Phase / 50Hz)
• Power cable with plug
• Start/Stop Switch
• Aluminium frame
• Manual condensate drain
• Pressure maintaining and non return valve
• 1x Filling hose c/w filling valve and pressure gauge
• Intermediate coolers
• Oil- / Water separators after 2nd and 3rd stage
• Safety valves after for each stage
• All pistons with piston rings
• Filling pressure to your choice (200 or 300 bar)
• Connections to your choice
(DIN 200 bar or 300 bar, CGA 200 bar or 300 bar and INT)
• Breathing air purification an accordance to EN 12021
Difference to the Standard-Model
• Frame in a aluminium (Standard: s/s)
• No carrying handles
• Unpainted compressor block
• No filling valve holder
Options
• Carrying handles
• Filling valve holder
• Additional filling hose c/w filling valve
• Automatic condensate drain
• Automatic stop at final pressure c/w hour counter
• Switch over device for 200 or 300 bar
• Motor protection switch
• Special voltages / frequencies on request
• Conversion set: Petrol-/electro version
Type: | Air cooled piston compressor |
Capacity [l/min] / [Nm³/h] / [cfm]: | 100 / 6 / 3.5 |
Max. Pressure [bar]: | 330 |
RPM [1/min]: | 2300 |
No of cylinders / No of stages: | 3 / 3 |
Prime mover type: | E-Motor / 230V / 1 Phase / 50Hz |
Drive power [kW] with 50 Hz / 60 Hz: | 2.2 / 2.2 |
Cooling air req. [m³/h] with 50 Hz / 60 Hz: | 660 / 660 |
Lubrication type: | Splash oil |
Oil capacity [l]: | 0.5 |
Operating temperature [°C]: | +5°C to +45°C |
Filter capacity [m³ at +20°C]: | 108 (approx. 18 hours) |
Dimensions W x D x H [mm]: | 670 x 400 x 400 |
Weight [kg]: | 42 |
Noise level (measured at 1 m) [dB]: | 82 |